PUDU GT5

Commercial mower for large areas

This is the volume model of the line: a 1.52 m cutting width and 8,000 m² an hour. One charge covers 6.5 hectares, so a large site fits into a single shift without stopping at midday.

It mows and vacuums on the same pass, empties itself when the hopper fills and returns to the point where it stopped. Between areas it travels along pre-mapped routes, so one machine covers several fields or parks without anyone hauling it.

The chassis is steel and protection is IP66. It is built for daily commercial use, not for a single season.

1.52 m cutting width
8,000 m² an hour
Up to 10 h run time
6.5 hectares per charge
Edges within 5 cm
360° awareness

Features

Covers 8,000 m² an hour

The 1.52 m cutting deck is what delivers the throughput. On large surfaces the gap against a narrow machine is measured in working days, not minutes.

Ten hours without stopping

A full charge covers 6.5 hectares. No need to break at midday to plug it in, which is usually what wrecks the schedule.

Empties itself and resumes

When the hopper fills it drives to the discharge point and returns precisely to where it left the task. Work continues with no one stepping in.

The map builds itself

It surveys the ground and generates the working map, and can lean on satellite imagery to locate the target areas. No walking the perimeter by hand to start on a new site.

Edges within 5 cm

Precision positioning holds a stable line and lets it cut close to the boundary. Less uncut strip left to touch up.

It looks in every direction

It combines perimeter cameras, RGB-D and LiDAR. It recognises pedestrians, vehicles and things that turn up where they should not — a hose, a light pole — and brakes, slows or goes around.

It does not fall off the edge

It detects dangerous drops: the bank of a pond, a stairway, a steep slope. Combined with the map's exclusion zones, that rules out a rollover.

Steel chassis and IP66

Built for daily commercial use, with the internals protected from rain and damp.

Specifications

Dimensions	1,910 × 1,586 × 1,293 mm
Weight (with batteries)	850 kg
Cutting width	1,520 mm (60")
Cutting height	26 to 152 mm
Mowing throughput	8,000 m²/h (2 acres/h)
Top mowing speed	11 km/h (3 m/s)
Maximum gradient	20°
Battery capacity	26 kWh
Run time	8 to 10 h
Area per charge	65,000 m² (6.5 ha)
Charging time	8 h standard (3 kW) · 4 h with optional fast charging (6 kW)
Protection	IP66, steel chassis