PUDU GT3

Mower and sweeper in one machine

It cuts the grass and picks up what it cuts on the same pass. Clippings, leaves and light debris go into the hopper as the machine moves, so there is no second job of raking and bagging.

It runs in two modes. On grass it mows and vacuums; on paving it disables the blade and works as a sweeper, using the side brushes and the suction inlet. Outside the mowing season the machine still has work to do, which is what changes the arithmetic when you price the investment.

It is the smallest of the line: a 914 mm cutting width and 450 kg. For medium grounds, gated communities, plants with parkland and public spaces where lawn and paving sit side by side.

Mows and collects on one pass
Two modes: grass and paving
Empties itself and resumes where it stopped
Mapping by walking the perimeter
Autonomous transit between areas
IP66, built to work outdoors

Features

Cuts and collects at once

As the blade cuts, suction lifts clippings, leaves and light debris and stores them. No grass left lying around waiting for someone to gather it.

Useful all year

In paving mode the blade is disabled and it works with the side brushes and suction inlet, as a sweeper. Outside the mowing season the machine is not sitting idle.

Empties itself and returns to the exact spot

When the hopper fills it drives to the discharge point, empties, and comes back to where it left off. Nobody has to stand by.

The map is made by walking the edge

One lap of the perimeter is enough: the robot works out for itself where the grass ends and the hard surface begins. The map is saved, and no-go zones and crossings are edited by hand afterwards.

Several areas, one job

If the site has separate lawns, they are set up as one continuous task. On finishing one, the robot travels along approved routes to the next without anyone moving it.

The edge gets done

Brushes on either side of the suction inlet push leaves and debris towards the centre. That is where the difference against a machine that only mows shows up: less manual touching up.

It sees what crosses its path

It combines vision sensors and LiDAR to identify people, vehicles, animals and fixed objects. Depending on the risk it slows, waits, goes around or stops.

Ready for the weather

IP66 protection against dust and splashing, and it can be washed down. It adds an emergency stop, blade lockout, and a lockout if it is lifted or tilts too far.

Specifications

Dimensions	1,602 × 947 × 1,203 mm
Weight (with batteries)	450 kg
Cutting width	914 mm (36")
Cutting height	26 to 114 mm
Top mowing speed	11 km/h (3 m/s)
Battery capacity	13 kWh
Run time	4 to 6 h
Area per charge	20,000 m² (2 ha)
Charging time	4 h standard (3 kW) · 2 h with optional fast charging (6 kW)
Protection	IP66
Navigation	Semantic vision + LiDAR